SPIRIT LEVELS
EUROSTAR

Type
Aluminium profile spirit level
Technical characteristics
Anodized profile
Cross section approx. 50 x 22 mm
Wall thickness 1.5 mm
ALUSTAR

Type
Aluminium profile spirit level
Technical characteristics
Anodized profile
Cross section approx. 50 x 22 mm
Wall thickness 1.6 mm up to 120 cm in length
Wall thickness 2.2 mm at least 150 cm in length
SUPERSTAR

Type
Aluminium profile spirit level
Technical characteristics
Powder coated profile
Cross section approx. 50 x 22 mm
Wall thickness 1.8 mm up to 120 cm in length
Wall thickness 2.3 mm at least 150 cm in length
Milled measuring surface
ROBUST

Type
Aluminium profile spirit level
Technical characteristics
Powder-coated profile
Cross section approx. 60 x 26 mm
Wall thickness 2 mm
Torsion-resistant 4-chamber profile
Two milled measuring surfaces
HIGHPRECISION

Type
Aluminium profile spirit level
Technical characteristics
Anodized profile
Cross section approx. 75 x 26 mm
Wall thickness 2 mm
Torsion-resistant 4-chamber profile
Vials with a high degree of sensitivity
CONSTRUCT

Type
Aluminium profile spirit level
Technical characteristics
Powder-coated profile
Cross section approx. 50 x 22 mm
Wall thickness 1.2 mm
The welcome model for cost-aware users.
ULTRASONIC

Type
Aluminium profile spirit level
Technical characteristics
Anodized profile, Wall thickness 1.8 mm
Length 20 und 25 cm
Cross section approx. 50 x 22 mm
Optimally visible vertical bubble tube
with a magnet
POLYWOOD

WOODEN

Type
Wooden spirit level
Technical characteristics
made of hardwood
Cross section 56 x 26 mm
666

Type
Aluminium cast spirit level
Technical characteristics
Trapezoidal shape
Powder-coated body
Milled measuring surface
665 S

Type
Aluminium cast spirit level
Technical characteristics
Rectangular
Powder-coated body
Cross section 58 x 28 mm
milled all around
689 R

Type
Aluminium cast spirit level
Technical characteristics
Rectangular
Powder-coated body
Cross section 48 x 25 mm
milled all around
LEVELTRONIC

Type
Electronic level
Technical characteristics
Spirit level with electronic inclinometer
Anodized profile
Cross section approx. 50 x 22 mm
LEVELBOY

Type
Electronic level
Technical characteristics
Water scale with electronic inclinometer
Body made of glass fibre reinforced plastic
Dimensions L x W x H: approx. 200 x 45 x 75 mm
with a variety of mounting options
Incli Tronic plus

Type
Electronic level
Technical characteristics
Spirit level with electronic inclinometer
robust power-coated 4-chamber profile
Cross section 60×26 mm
inclination

Type
Special purpose level
Technical characteristics
Heavy die-cast aluminium version
Milled measuring surface
Powder-coated body
Length 50 cm
INCLIFIX level

Type
Special purpose level
Technical characteristics
built on an anodized aluminium profile
Length: 60 cm
Transmission level

Type
Special purpose level
Technical characteristics
Steel body
prismatic base
scraped contact surfaces
available in different degrees of sensitivity

Type
Plastic bubble level
Technical characteristics
High-impact plastic level
Rectangular
Dimensions: 100 x 35 x 13 mm
NIVELLE

Type
Plastic bubble level
Technical characteristics
High-impact plastic level
prismatic surface
with circular bubble used for aligning posts
Dimensions: 150 x 25 x 23 mm
LINE-LEVEL

TRIVELLE

Type
Plastic bubble level
Technical characteristics
High-impact plastic level
Torpedo-shaped
comes with a magnetic strip in the measuring surface
Dimensions: 200 x 42 x 17 mm
INKLINAT

Type
Plastic bubble level
Technical characteristics
High-impact plastic level
Additional rotating vial to transfer inclinations
Dimensions: 255 x 55 x 19 mm
UNIVERSAL

Type
Plastic bubble level
Technical characteristics
High-impact plastic level
Additional rotating vial to transfer inclinations
equipped with two strong disk magnets
Dimensions: 250 x 54 x 15 mm
TORPEDO

Type
Plastic bubble level
Technical characteristics
Level made of glass fibre reinforced plastic
Torpedo-shaped
Round vials allow good readability
equipped with two strong disk magnets
Dimensions: 250 x 43 x 22 mm
Vials

BMI vials
individually available in
different versions
689 WL

Type
Straight-edge
Technical characteristics
Straight-edge made of aluminium profile
No vial
Cross section approx. 100 x 18 mm
689 RL

Type
Straight-edge
Technical characteristics
Straight-edge made of aluminium profile
with 1 horizontal and 1 vertical vial
Cross section approx. 100 x 18 mm
689 RS

Type
Straight-edge
Technical characteristics
Straight-edge made of aluminium profile
with 1 horizontal and 1 vertical vial
with hand holds for easy handling
Cross section approx. 100 x 18 mm
689 HK

Type
Trapezoid-shaped profiles
Technical characteristics
made of the so-called H-profile
or special applications
with reinforcement bead
Cross section approx. 114 x 27 mm
689 TK

Type
Trapezoid-shaped profiles
Technical characteristics
Trapezoid-shaped aluminium profile
Trapezoidal shape
Cross section approx. 98 x 18 mm
689 RL-EL screeding

Type
Straight-edge
Technical characteristics
Straight-edge made of aluminium profile
one horizontal vial
extra thick base 4 mm
Box section approx. 83 x 18 mm